Home » MIL-STD-461G Webinars

MIL-STD-461G Webinars

mil-std-461G

Dates and SessionsDescriptionYour PresenterRegistration2016 Recordings

Time: 9:00 AM ET

Webinar Series Classes

January 11, 2017: MIL-STD-461G, General Requirements
MIL-STD-461G incorporated many changes into the general requirements from changes in calibrations and configuring the test item to adding test equipment allowed.  This class of the MIL-STD-461 subject series provides an overview with the new details and rationale for the changes.  A necessary introduction that supports all the individual test methods of the subject classes.

January 18, 2017: MIL-STD-461G, CE101, CE102
Conducted emission measurements are well defined but a thorough review of this class provides the basics on controlling data collection and presenting the measurements.  Conducted emission measurements are applicable to all services and installations and the method supports variation in instrumentation that includes test parameter adjustments presented in this class.

January 20, 2017: MIL-STD-461G, CE106, RE103
Antenna port emissions apply to many devices in this age of wireless technology used by a large variety of devices.  This class discusses not only the measurements but provides guidance on managing the test configuration to prevent damage or saturation by transmitting signals.  These tests call for conducted (CE106) testing with radiated (RE103) as the alternative where conducted measurements are hindered.  If wireless is part of your product, this class is critical to preparing and executing the applicable tests.

January 25, 2017: MIL-STD-461G, RE101, RE102 
Radiated emissions are applicable to all services and installations as the fundamental means of identifying interference producers.  A few changes in revision “G” are identified along with the instruction on performing these tests and analyzing the data for potential measurement errors.  These tests are frequently accomplished early to find risk areas that are solved early by the notion of “what goes out may come in” so potential susceptibility issues are often mitigated.

January 27, 2017: MIL-STD-461G, CS101 
CS101 – the first class of the susceptibility group introducing the concept of managing two test control levels while monitoring the test article performance.  Keeping up with all the parameters and test item monitoring tasks the focus of the test engineer so this discussion helps with how to take care of the total test.  This test appears very straight-forward but is frequently laden with test errors – an essential class for understanding the susceptibility testing.

February 1, 2017: MIL-STD-461G, CS114, CS115, CS116
CS114 is likely the most error prone test because the complexity of two test control levels mixes with RF parameters that are greatly affected by parasitic elements of the configuration.  CS115 and CS116 are similar in the approach but with transients being the culprit so this is integrated into the class.  The test method details are presented with information on what is happening within the configuration that must be understood to be properly managed for test integrity.

February 3, 2017: MIL-STD-461G, CS117, CS118
These tests were introduced in revision “G” to deal with induced lightning and electrostatic discharge events.  These tests have many details associated with test parameters and calibration of the test levels and waveform control.

February 8, 2017: MIL-STD-461G, RS101, RS103
Radiated susceptibility tests that represent the testing with the largest time in the overall test program.  RS103 is applicable to all services and installations so understanding is essential.  Many test items include wireless technology, understanding how to manage vulnerability from radiated interference with intentional reception is a crucial part of this class.

February 10, 2017: MIL-STD-461G, CS103, CS104, CS105, CS109, RS105
This class provides an overview of the other test methods of MIL-STD-461.  The group of tests have specific applicability and as such are infrequently specified – but when specified the test personnel need to understand the concepts to support preparation of the detailed test procedure.  This class provides for that concept introduction.

February 15, 2017: MIL-STD-461G, Documentation/DIDs  From test planning to reporting and analysis of information for system level integration, the documentation review guides to meeting the data item description details.  Throughout the test and evaluation program, well prepared documents provide guidance and critical details for acceptance of the results.  Questions should be answered before being asked is a goal that is seldom achieved.  Discussion on this portion of the test program is geard to support that goal.

Webinar Description

Military and Aerospace Systems must comply with Electromagnetic Compatibility (EMC) requirements. MIL-STD-461 is applied to Department of Defense (DoD) procurements for equipment and subsystems.

MIL-STD-461 test and evaluation methods will be presented, including system requirements, general requirements, test article configurations, and documentation. This course offers critical information for military compliance professionals, testing industry professionals, and developers involved with electronics systems development.

This multi-part series of 1-hour webinars presented at regular intervals throughout the calendar year provides detailed focus on performing the testing, reducing and understanding the data and managing test problems.

This course delivers the what, why and how in MIL-STD 461 compliance. Understanding the evaluation process will enlighten designers of complex Military equipment, help improve their designs and increase compliance with the testing regimens.

Webinar Objectives

In addition to describing test methodology and limits, we will discuss planning and reporting. Documentation of the evaluation process is critical. Also presented will be the concept of tailoring of requirements to meet program needs and rationale necessary for preparing acceptable tailoring.

Webinar attendees will receive a recording of the presentation and the presentation slides for reference long after the event.

Who Should Attend

  • Product and program managers that need to understand the EMC compliance requirements;
  • Compliance engineers responsible for technical EMC details supporting the product design;
  • Laboratory managers and test personnel responsible for developing the test programs;
  • Auditors and witnesses to gain insight on how tests are tailored for necessary variance from the standard.

The Presenter

Steve Ferguson

Steve_Ferguson

Steven G. Ferguson is Executive V.P. at Washington Laboratories, Ltd (WLL) and has been working in EMC, Safety, MIL-STD, Nuclear, Energy and related compliance engineering and test for over 35 years at test laboratories and manufacturers. His work includes designing products, developing procedures, performing tests and advising developers on routes and techniques for attaining product compliance. He has been directly involved with EMC design and compliance evaluation for many systems including several power plants (facilities and equipment qualification), hospitals, presidential aircraft, the Space Shuttle and Hubble Space Telescope. He presents various courses on EMI/EMC compliance including EMC for Nuclear Power Facilities, Architectural Shielding and a hands-on course MIL-STD-461 testing at the WLL facility in Maryland and on-site for multiple government and industrial clients. His work also includes EMC, Environmental and Safety evaluations for commercial, military and medical devices and training of hundreds of personnel on test and evaluation techniques. He has authored several papers on equipment qualification and evaluation techniques with presentations at many conferences. He is a member of the TR-102323 Working Group and supported preparation of Revision 4.

Pricing

Single seat license = $99 per webinar

Site license (up to 10 from the same organization) = $300 per webinar

Receive a 15% discount when purchasing the complete series.

*The registration fee includes access to the recorded webinar for up to 30-days after the event. Thereafter, the recorded webinar can be purchased at wll.coggno.com/shop.

Registration Policy

  • If the registrant is unable to attend a particular session the recording and presentation will be provided.
  • If Washington Labs Academy cancels a particular event, we will apply payment to another webinar or refund the charge for that event.
  • Site license holders can list up to 10 different attendees (guests) for each registration. The name and email for each person that will sign-in is needed at least 1-business day prior to the event for us to establish sign-in privileges.

This multi-part series will be held on the following dates:

Date Time Seat
1/11/2017 9:00 AM ET General requirements Sign Up
1/18/2017 9:00 AM ET CE101, CE102 Sign Up
1/20/2017 9:00 AM ET CE106, RE103 Sign Up
1/25/2017 9:00 AM ET RE101, RE102 Sign Up
1/27/2017 9:00 AM ET CS101 Sign Up
2/1/2017 9:00 AM ET CS114, CS115, CS116 Sign Up
2/3/2017 9:00 AM ET CS117, CS118 Sign Up
2/8/2017 9:00 AM ET RS101, RS103 Sign Up
2/10/2017 9:00 AM ET CS103, CS104, CS105, CS109, RS105 Sign Up
2/15/2017 9:00 AM ET Documentation/DIDs Sign Up

MIL-STD-461G Webinars: EMC Testing for Military Systems

2016 Recordings Available

This multi-part series was held on the following dates:

Date Recorded Seat
1/20/2016 General requirements Purchase Recording
2/17/2016 CE101, CE102 Purchase Recording
3/16/2016 CE106 / RE103 Purchase Recording
4/20/2016 CS101 Purchase Recording
5/19/2016 CS103 / CS104 / CS105 Purchase Recording
6/22/2016 CS114 Purchase Recording
7/20/2016 CS115/CS116 Purchase Recording
8/17/2016 CS117/CS118 Purchase Recording
9/14/2016 RE101 / RE102 Purchase Recording
10/19/2016 RS101 / RS103 Purchase Recording
11/9/2016 CS109 / RS105 Purchase Recording
12/14/2016 Documentation / DIDs Purchase Recording
Single License 12-Pack of Videos (Bundle) $900.00 Single License Bundle
Site License 12-Pack of Videos (Bundle) $1,350.00
*Site license holders can share this bundle with up to 10 guests from the same organization.
Site License Bundle

Learn more about our MIL-STD-461 Testing Services